All posts by shopsmithdoug

Do you love the smell of fresh cut pine, the feel of finely finished walnut, and owning good tools? My shop is my sanctuary, and woodworking is my therapy. I feel very fortunate to have been able to earn an income doing something I love. How can I help you?

Review: Kreg fence for Shopsmith bandsaw

screenshotKreg fence for Shopsmith bandsaw

 screenshot 2

update 10/17: While I stand by this review, I wanted everyone to know that I have taken the Kreg Jig off my bandsaw and replaced it with the original Shopsmith fence. Part of the reason is I find the old fence easier to set up for resawing and ripping, and I did not like the procedure for changing blades with the Kreg.

Anyone else have comments on the Kreg fence system?

Like anything else we have seen from Kreg (makers of the very successful Kreg Jigs), the Kreg fence for the Shopsmith bandsaw is well made, good looking, and works well. The fence and accessories increase the capacity of the Shopsmith table-I can now rip 9 inches wide, and with the micro adjustor I can get great accuracy and repeatability on rip and resaw cuts.

Resawing on the Kreg relies on an optional curved plate that attaches to the fence that makes following your line easier. The micro adjuster is optional, and worth the $15 if you need fine adjustment capabilities.

If, like me, you use your Shopsmith bandsaw for a lot of rip cuts, this fence is a good addition to an already great bandsaw. However, if you are just looking for a way to get accurate resawing, I suggest you check out my video (on this web page and on YouTube, on setting up the standard Shopsmith bandsaw fence before spending the $200 on the Kreg set up.This fence only works on the newer style (ALUMINUM) Shopsmith table. If you decide you want to purchase this, send me an email to…I will make sure you are getting the best price.♥♥♥♥

Disclaimer: We are independent contractors, not Shopsmith employees, but we earn a commission from Shopsmith for items purchased through this site. However, as we have for the past 20 years, we will always offer honest opinions and our best advice.

Power Pro Headstock Review

pp_cutaway_d_l        sf_speed_control_aIMG_1505m7_cutaway_motor

Now, about the PowerPro: I like it, A LOT! The motor is a new technology that is neither AC nor DC in the way we would normally think of things. They call it Digital Variable Reluctance and a Google search will provide you with a great deal of information about this new type motor.

For me, what is important: I get twice the usable torque at every speed!

This has always been the missing ingredient in variable speed products. Whether slicing through heavy rip cuts in old warped cherry, turning large, out of balance bowls, or resawing on my band saw, the difference is clear. In fact, every operation that is powered by the Mark headstock gets an upgrade. I can take heavier cuts on my jointer, resaw thicker boards, crosscut and rip with ease, turn bigger bowls, more safely and efficiently.

The motor is controlled by a computer that reads and adjusts torque requirements at a rate of 400 times per second, and not only gives me noticeably better performance, the folks at Shopsmith tell me the power usage is reduced by 80%.

I found learning to use the PowerPro quick and intuitive. The only habit I found hard to break was using the main on/off switch, but that was quickly overcome with use.

One of my favorite things about this new technology is the ability to improve it even more by a five-minute conversion to 220…really, five minutes.

It simply involves removing the standard 110v plug and replacing it with a 220v plug, then plugging into a 220v receptacle. (If you don’t have 220v. in your shop, it is easy to add, if your circuit breaker panel is near, and it has room to add a circuit.) IF IN DOUBT, CONSULT A LICENSED ELECTRICIAN.

Other good features: You can set a lock out code to keep kids or anyone else from operation your Mark V or Mark7. You can get so precise; for example, you can set exactly for strip sanding, 180 grit, hardwood, garnet abrasive. It’s just fun to use.

While this is not an inexpensive upgrade, I feel like it leap-frogs Shopsmith owners ahead of anything else on the market. ♥♥♥♥♥

Note: Susan and I contract with Shopsmith, Inc. to produce webinars for Shopsmith. We get paid commissions when people purchase Shopsmith products through us.
However, as we have for 20 + years, we strive to provide honest advice and our best opinions in all of our dealings.

Hello Shopsmith owner!

In my old shop with my grandson, Russell/
In my old shop with my grandson, Russell/

cropped-logo2011-copy.jpgWelcome to our blog, Shopsmith woodworker. We (my wife Susan and I) started this blog to share our love of woodworking and all things Shopsmith.

We invite you to share your thoughts, photos, plans, projects, and Shopsmith history with us and other Shopsmith owners.

We will post and share our experiences, answer questions (or help find the answers). We are both Shopsmith owners, and were demonstrators and instructors for more than 20 years.We have been recognized as “Shopsmith’s greatest goodwill ambassadors” by Shopsmith’s CEO Bob Folkerth.

On the Shopsmith Users Group, Susan has been called “flat out the best woodworking instructor ever.”

We are producing videos on how to use the Shopsmith tools, our favorite tips, and unvarnished opinions. These will be posted here, eventually, but most can be found on YouTube-search under Doug Reid Channel, or shopsmithdoug.

Disclaimer: We produce sales webinars for Shopsmith, but are not employees of Shopsmith; our opinions and techniques are our own, and we are responsible for all content.

Doug and Susan Reid