A chop saw is the one tool I really want to have in addition to my Mark 7. Yes, I can, and do, make compound miter cuts on my Shopsmith, as long as the project is fairly small, nothing more than a 3′ length.
But for longer cuts, like crown molding on kitchen cabinets, bookcases, etc. nothing beats a compound miter (chop) saw.
Since space is always limited, and a big chop saw base takes up a lot of real estate, it occurred to me that the Shopsmith could make a nifty base for my small Ryobi chop saw.
Here are my requirements: It would have to mount on and off the Shopsmith quickly. It would need to be solid and secure. It would….no, I guess that’s it. (Discovery! I found that if I do it right, I can still use it as the Mark 7 as a table saw while the chop saw is in place!)
My idea is to use the main and extension table of the Shopsmith to provide support on either side of the chop saw.
John Burger’s Ultimate saw table for Shopsmith
Mark 7 set up with out feed tables for plywood, made with existing tables.
Doug Reid shows easy steps for setting bandsaw fence for accurate resawing.
Kreg fence for Shopsmith bandsaw
update 10/17: While I stand by this review, I wanted everyone to know that I have taken the Kreg Jig off my bandsaw and replaced it with the original Shopsmith fence. Part of the reason is I find the old fence easier to set up for resawing and ripping, and I did not like the procedure for changing blades with the Kreg.
Anyone else have comments on the Kreg fence system?
Like anything else we have seen from Kreg (makers of the very successful Kreg Jigs), the Kreg fence for the Shopsmith bandsaw is well made, good looking, and works well. The fence and accessories increase the capacity of the Shopsmith table-I can now rip 9 inches wide, and with the micro adjustor I can get great accuracy and repeatability on rip and resaw cuts.
Resawing on the Kreg relies on an optional curved plate that attaches to the fence that makes following your line easier. The micro adjuster is optional, and worth the $15 if you need fine adjustment capabilities.
If, like me, you use your Shopsmith bandsaw for a lot of rip cuts, this fence is a good addition to an already great bandsaw. However, if you are just looking for a way to get accurate resawing, I suggest you check out my video (on this web page and on YouTube http://www.youtube.com/watch?v=19KUOXatLPY), on setting up the standard Shopsmith bandsaw fence before spending the $200 on the Kreg set up.This fence only works on the newer style (ALUMINUM) Shopsmith table. If you decide you want to purchase this, send me an email to firstname.lastname@example.org…I will make sure you are getting the best price.♥♥♥♥
Disclaimer: We are independent contractors, not Shopsmith employees, but we earn a commission from Shopsmith for items purchased through this site. However, as we have for the past 20 years, we will always offer honest opinions and our best advice.